ACERA™ Eye-and-Eye Slings
Eye-and-Eye Slings
High Performance slings – up to mbl 728 ton
Slings made from High Modulus Polyethylene (HMPE) have set new standards for lifting gear.
The Acera™ slings are made from Acera™ Amundsen 12 strand ropes or Acera™ daGama.
Acera™ Amundsen and Acera™ daGama are high performance ropes made from genuine Acera™ HMPE yarns, which are individually coated through a rotating 360° Kiss-roller process.
Single yarn coating is proven to significantly enhance internal and external abrasion resistance, and extend service life and strength. The sling eyes have Protech™ cover. A proprietary braided protection made from Acera™ yarn. The splices are protected by a weaved polyester Y-cover.
All Acera™ slings are produced in accordance with own technical file based on ISO 18264:2016 standard. The eyes are hand-spliced with our own positive locking tuck variant, ensuring anti-slip under all circumstances. Acera™ slings are the alternative to cumbersome steel wires. They are stronger and safer. The corresponding weight is more than 7 times lower. Compared to conventional fiber ropes, the resulting reduction in diameter leads to significant savings in weight (60%), space and handling. Acera™ slings provide a safer and more productive lifting operation. The light weight, ultra strong Acera™ slings are available at a market competitive price and can be customised to suit numerous applications.
Key Benefits
- Less risk to the crew
- Less injuries
- 1/7 of weight steel wire ropes.
- Easier handling
- Faster operation
- Less personnel needed
- Higher lifting capacity
- Less back injuries
- No contact damage
- No fraying or sharp edges
- Superior bending flex fatigue
- Easy to inspect and repair
Product Features
- Construction
- 12-strand plaited core
- Fiber
- Acera™ HMPE
- Specific gravity
- HMPE cover 0,97 (floating)
- Colours
- Platinum
- UV resistance
- Excellent
- Abbrasion resistance
- Excellent
- Acid resistance
- Excellent
- Alkali resitance
- Excellent
- Most chemicals resistance
- Excellent
- Cold & frost resistance
- Excellent
- Water resistance
- Excellent (0% absorption)
- Heat resistance
- Low (145-150 melting)
- Elongation
- Low (2-3% at break)
- Oil content in fiber
- >0,1%
- Cold & frost resistance
- Excellent
- Chemical resistance
- Excellent
| diameter | MBL spliced | MBL spliced | Work Load Limit (WLL) | Work Load Limit (WLL) |
|
vertical and choker hitches SAFETY FACTOR 7:1
|
vertical and choker hitches SAFETY FACTOR 7:1
|
|||
| (mm) | (t) | (kN) | (vertical t) | (vertical kN) |
| 6 | 3.7 | 36 | 0.52 | 5.14 |
| 8 | 6.3 | 62 | 0.90 | 8.86 |
| 10 | 9.7 | 95 | 1.38 | 13.57 |
| 12 | 13.8 | 135 | 1.97 | 19.29 |
| 14 | 18.4 | 180 | 2.62 | 25.71 |
| 16 | 23.5 | 230 | 3.35 | 32.86 |
| 18 | 29.1 | 285 | 4.15 | 40.71 |
| 20 | 34.7 | 340 | 4.95 | 48.57 |
| 22 | 41.3 | 405 | 5.90 | 57.86 |
| 24 | 47.9 | 470 | 6.85 | 67.14 |
| 26 | 55.1 | 540 | 7.87 | 77.14 |
| 28 | 62.7 | 615 | 8.96 | 87.86 |
| 30 | 71.4 | 700 | 10.20 | 100 |
| 32 | 79.5 | 780 | 11.36 | 111.43 |
| 34 | 88.7 | 870 | 12.67 | 124.29 |
| 36 | 98.4 | 965 | 14.06 | 137.86 |
| 38 | 108.1 | 1060 | 15.44 | 151.43 |
| 40 | 117.8 | 1155 | 16.83 | 165 |
| 44 | 140.2 | 1375 | 20.03 | 196.43 |
| 48 | 163.2 | 1600 | 23.31 | 228.57 |
| 52 | 187.6 | 1840 | 26.80 | 262.86 |
| 56 | 213.6 | 2095 | 30.52 | 299.29 |
| 60 | 241.7 | 2370 | 34.52 | 338.57 |
| 64 | 270.7 | 2655 | 38.68 | 379.29 |
| 68 | 301.3 | 2955 | 43.05 | 422.14 |
| 72 | 333.4 | 3270 | 47.64 | 467.14 |
| 76 | 367.1 | 3600 | 52.44 | 514.29 |
| 80 | 401.8 | 3940 | 57.40 | 562.86 |
| 84 | 438 | 4295 | 62.57 | 613.57 |
| 88 | 475.2 | 4660 | 67.88 | 665.71 |
| 92 | 514.3 | 5044 | 73.48 | 720.57 |
| 96 | 554.2 | 5435 | 79.17 | 776.43 |
| 100 | 596 | 5845 | 85.15 | 835 |
| 102 | 617.1 | 6052 | 88.16 | 864.57 |
| 104 | 638.9 | 6265 | 91.27 | 895 |
| 108 | 682.7 | 6695 | 97.53 | 956.43 |
| 112 | 728.1 | 7140 | 104.01 | 1020 |
Nominal diameter as per definition in ISO 1968. Minimum strength defined as MBF/ MBL (Minimum Breaking Force, minimum breakload) of spliced application, and measured in kilogram force/kp, tested according to ISO 2307 and verified by DNV GL. Work Load Limits ( WLL ) is measured in metric tons and kilonewtons based on a safety factor 7:1, as defined by the Machinery Directive 2006/42/EC.
Customer service
We have the local knowledge and industry expertise to find the best solution to cater for your needs, do not hesitate to get in touch and ask for an advice.
+421 32 640 17 13 timm-sales@wilhelmsen.comCertificate
